Page-10 All Products - Slide Module,Linear Module,Linear Motion Unit,Precision Manipulator,Servo Positioning Slide,Automation Control Equipment

variable speed linear actuator

Compared with the SMC embedded module: the channel and the base are attached, the inner channel of the module slide and the base are matched by the card slot, and the channel can freely extend and move, because the channel and the base are not tightly attached, affecting the operation. Precision. The DTH channel and...

Contact Now

Precision miniature linear guides

Model No.: DG135

The sliding table module is a highly automated device. Special attention must be paid to safety issues during the entire practical process. A little carelessness will lead to unimaginable consequences. 1. It is forbidden to use it under the possibility of magnetoelectric interference. In places where there is...

Contact Now

Original Ball Slide Block Bearing Linear Guide

Model No.: G135

Slide Linear Guide Original Ball Slide Block Bearing Linear Guide The semi-enclosed linear sliding table module is mainly composed of aluminum body, diagonal bearing holder, cover plate, sliding seat and other components. It uses corrosion-resistant, high-strength aluminum alloy material as the base, and installs a...

Contact Now

Low noise linear slide

Model No.: DG135

Linear sliding table is a mechanical structure that can provide linear motion. Tongchuangda sliding table can be used horizontally or vertically, or combined into a specific motion mechanism-that is, it is usually called XY axis and XYZ axis in the automation industry. And other multi-axial motion mechanisms. This...

Contact Now

12 volt linear actuator with remote

Model No.: DTH8

In-line groove design: Module slides of the same width can be increased by 30% compared to modules with rails. Optimized module slide design: Since the groove is embedded and then shaped and ground, the height and parallelism of the walking are improved, which is 40% higher than that of the mounting rail form module....

Contact Now

Miniature precision miniature linear guide

Model No.: DG135

Because linear sliding tables have very little frictional resistance, ball screws are widely used in various industrial equipment and precision instruments. Ball screws are composed of screws, nuts and balls. Its function is to convert rotary motion into linear motion. The care function and positioning accuracy are...

Contact Now

12v dc linear actuator

Model No.: ATH8

Guangdong TICO Automation Technology Co.,Ltd. is a high-tech enterprise specializing in R&D, manufacturing,Remote Control Linear Actuator, sales and service of Ip67 Linear Actuator, Guide Rail, Rotary Voice Coil Actuator,fast linear actuator, Linear Actuator 12v Motor. The company has a number of long-term engaged...

Contact Now

Competitively priced electric sliding table

Model No.: DG135

The linear module sliding table is an important auxiliary equipment that many automation equipment need to use. The common ones are: dispensers, printing machines, soldering machines, robotic arms, etc. Linear module sliding table manufacturers have also become the main channel for many equipment factories to purchase...

Contact Now

High-performance electric sliding table

Model No.: DG135

Labyrinth-shaped high-strength aluminum alloy, equipped with two linear guides and four sliding blocks, has strong load-bearing capacity. The DG series adopts a screw rod with high transmission repeatability. It is equipped with a rolling screw rod with a repeat accuracy of ±0.01 and a grinding screw rod with a repeat...

Contact Now

best circular saw guide rail

Compared with the SMC embedded module: the channel and the base are attached, the inner channel of the module slide and the base are matched by the card slot, and the channel can freely extend and move, because the channel and the base are not tightly attached, affecting the operation. Precision. The DTH channel and...

Contact Now

electric linear actuator DTH8

Model No.: DTH8

In-line groove design: Module slides of the same width can be increased by 30% compared to modules with rails. Optimized module slide design: Since the groove is embedded and then shaped and ground, the height and parallelism of the walking are improved, which is 40% higher than that of the mounting rail form module....

Contact Now

Linear guides with a load of 25KG

Guangdong TICO Automation Technology Co.,Ltd. is a high-tech enterprise specializing in R&D, manufacturing,Remote Control Linear Actuator, sales and service of Ball Bearing Rail, Guide Rail, Programmable Linear Actuator,fast linear actuator, Linear Rotary Actuator. The company has a number of long-term engaged in...

Contact Now

Black Steel Belt Fully Enclosed Self-lubricating

Model No.: ATH8-BLACK2

Black Steel Belt Fully Enclosed Self-lubricating High Rigidity Precision Screw Linear Module Sliding Table Products Description Company Profile Guang Dong Tiangong Automation Technology Co., Ltd. is located in Jiangmen Xinhui Guzhou Development Zone. It is a national high-tech enterprise focusing on the R&D,...

Contact Now

linear actuator with feedback

Compared with the SMC embedded module: the channel and the base are attached, the inner channel of the module slide and the base are matched by the card slot, and the channel can freely extend and move, because the channel and the base are not tightly attached, affecting the operation. Precision. The DTH channel and...

Contact Now

firgelli 12v linear actuators

Model No.: DTH8

In-line groove design: Module slides of the same width can be increased by 30% compared to modules with rails. Optimized module slide design: Since the groove is embedded and then shaped and ground, the height and parallelism of the walking are improved, which is 40% higher than that of the mounting rail form module....

Contact Now

High-speed automatic linear guides

Model No.: C100

TICO's linear modules are well designed, with strict shaft assembly process and very high performance. In order to allow customers to use our linear modules more directly and conveniently, our company has also launched various types of linear modules. In the future, we will continue to focus on developing and...

Contact Now

micro linear actuator arduino

Model No.: DTH8

In-line groove design: Module slides of the same width can be increased by 30% compared to modules with rails. Optimized module slide design: Since the groove is embedded and then shaped and ground, the height and parallelism of the walking are improved, which is 40% higher than that of the mounting rail form module....

Contact Now

Long life automatic linear module

Model No.: CB100

The load capacity of the automatic linear module, the linear module usually needs a certain load, that is, how much weight the module needs to load. At present, many linear module manufacturers can provide products with a variety of load capacities, and the factory must also select linear modules according to the...

Contact Now

high speed linear motor

Model No.: DTH8

In-line groove design: Module slides of the same width can be increased by 30% compared to modules with rails. Optimized module slide design: Since the groove is embedded and then shaped and ground, the height and parallelism of the walking are improved, which is 40% higher than that of the mounting rail form module....

Contact Now

Automatic linear module sliding table

Model No.: GB60

The linear module sliding table is an important auxiliary equipment that many automation equipment need to use. The common ones are: dispensers, printing machines, soldering machines, robotic arms, etc. Linear module sliding table manufacturers have also become the main channel for many equipment factories to purchase...

Contact Now

Embedded Module ATH 15

Model No.: ATH15

The built-in slide module is a highly integrated linear motion unit. The aluminum body and the guide rail are integrated into the design, and the slider and the slide are integrated. The module slide product is compact and lightweight to save space and high load. The linear module can be equipped with self-lubricating...

Contact Now

High performance linear guide

Model No.: DTB5

The aluminum alloy profile modular sliding table has beautiful appearance, reasonable design, good rigidity and reliable performance. It is an ideal basic power component for modular machine tools and automatic lines. It has good dynamic performance. The sliding table has high rigidity, small thermal deformation, and...

Contact Now

Synchronous belt type linear guide

Model No.: DTB5

Generally, the synchronous belt linear module is specially designed to control the tightness of the belt movement on one side, which is convenient for the debugging of the equipment during the production process. Synchronous belt type linear module can choose to increase the rigid guide rail according to different...

Contact Now

Embedded Synchronous Belt Embedded Ball Screw Sliding Table

Model No.: ATH8

Enclosed Linear Sliding Table Embedded Synchronous Belt, Linear Module, Embedded Ball Screw Sliding Table Guangdong TICO Automation Technology Co.,Ltd. is a high-tech enterprise specializing in R&D, manufacturing, Circular Saw Guide Bar,sales and service of slide module, linear module,Linear Sliding Table, linear...

Contact Now